*usr_03.txt* For Vim version 6.1. Last change: 2002 Jan 31
VIM USER MANUAL - by Bram Moolenaar
Moving around
Before you can insert or delete text the cursor has to be moved to the right
place. Vim has a large number of commands to position the cursor. This
chapter shows you how to use the most important ones. You can find a list of
these commands below |Q_lr|.
|03.1| Word movement
|03.2| Moving to the start or end of a line
|03.3| Moving to a character
|03.4| Matching a paren
|03.5| Moving to a specific line
|03.6| Telling where you are
|03.7| Scrolling around
|03.8| Simple searches
|03.9| Simple search patterns
|03.10| Using marks
Next chapter: |usr_04| Making small changes
Previous chapter: |usr_02| The first steps in Vim
Table of contents: |usr_toc|
*03.1* Word movement To move the cursor forward one word, use the "w" command. Like most Vim commands, you can use a numeric prefix to move past multiple words. For example, "3w" moves three words. This figure shows how it works:This is a line with example text--->-->->-----------------> w w w 3w Notice that "w" moves to the start of the next word if it already is at the start of a word. The "b" command moves backward to the start of the previous word:This is a line with example text<----<--<-<---------<--- b b b 2b b There is also the "e" command that moves to the next end of a word and "ge", which moves to the previous end of a word:This is a line with example text<- <--- ----->----> ge ge e e If you are at the last word of a line, the "w" command will take you to the first word in the next line. Thus you can use this to move through a paragraph, much faster than using "l". "b" does the same in the other direction. A word ends at a non-word character, such as a ".", "-" or ")". To change what Vim considers to be a word, see the 'iskeyword' option. It is also possible to move by white-space separated WORDs. This is not a word in the normal sense, that's why the uppercase is used. The commands for moving by WORDs are also uppercase, as this figure shows: ge b w e<- <- --->--->This is-a line, with special/separated/words (and some more).<----- <----- -------------------->-----> gE B W E With this mix of lowercase and uppercase commands, you can quickly move forward and backward through a paragraph.
*03.2* Moving to the start or end of a line The "$" command moves the cursor to the end of a line. If your keyboard has an<End>key it will do the same thing. The "^" command moves to the first nonblank character of the line. The "0" command (zero) moves to the very first character of the line. The<Home>key does the same thing. In a picture: ^ <------------.....This is a line with example text<----------------- --------------->0 $ (the "....." indicates blanks here) The "$" command takes a count, like most movement commands. But moving to the end of the line several times doesn't make sense. Therefore it causes the editor to move to the end of another line. For example, "1$" moves you to the end of the first line (the one you're on), "2$" to the end of the next line, and so on. The "0" command doesn't take a count argument, because the "0" would be part of the count. Unexpectedly, using a count with "^" doesn't have any effect.
*03.3* Moving to a character One of the most useful movement commands is the single-character search command. The command "fx" searches forward in the line for the single character x. Hint: "f" stands for "Find". For example, you are at the beginning of the following line. Suppose you want to go to the h of human. Just execute the command "fh" and the cursor will be positioned over the h:To err is human. To really foul up you need a computer.---------->---------------> fh fy This also shows that the command "fy" moves to the end of the word really. You can specify a count; therefore, you can go to the "l" of "foul" with "3fl":To err is human. To really foul up you need a computer.---------------------> 3fl The "F" command searches to the left:To err is human. To really foul up you need a computer.<--------------------- Fh The "tx" command works like the "fx" command, except it stops one character before the searched character. Hint: "t" stands for "To". The backward version of this command is "Tx".To err is human. To really foul up you need a computer.<------------ ------------->Th tn These four commands can be repeated with ";". "," repeats in the other direction. The cursor is never moved to another line. Not even when the sentence continues. Sometimes you will start a search, only to realize that you have typed the wrong command. You type "f" to search backward, for example, only to realize that you really meant "F". To abort a search, press<Esc>. So "f<Esc>" is an aborted forward search and doesn't do anything.Note:<Esc>cancels most operations, not just searches.
*03.4* Matching a paren
When writing a program you often end up with nested () constructs. Then the
"%" command is very handy: It moves to the matching paren. If the cursor is
on a "(" it will move to the matching ")". If it's on a ")" it will move to
the matching "(".
%
<----->
if (a == (b * c) / d)
<---------------->
%
This also works for [] and {} pairs. (This can be defined with the
'matchpairs' option.)
When the cursor is not on a useful character, "%" will search forward to find
one. Thus if the cursor is at the start of the line of the previous example,
"%" will search forward and find the first "(". Then it moves to its match:
if (a == (b * c) / d)
---+---------------->
%
*03.5* Moving to a specific line If you are a C or C++ programmer, you are familiar with error messages such as the following:prog.c:33: j undeclared (first use in this function)This tells you that you might want to fix something on line 33. So how do you find line 33? One way is to do "9999k" to go to the top of the file and "32j" to go down thirtytwo lines. It is not a good way, but it works. A much better way of doing things is to use the "G" command. With a count, this command positions you at the given line number. For example, "33G" puts you on line 33. (For a better way of going through a compiler's error list, see |usr_30|, for information on the :make command.) With no argument, "G" positions you at the end of the file. A quick way to go to the start of a file use "gg". "1G" will do the same, but is a tiny bit more typing. | first line of a file ^ |text text text text| |text text text text| gg 7G |text text text text| | text text text text | text text text text V text text text text | text text text text | G text text text text | last line of a file V Another way to move to a line is using the "%" command with a count. For example "50%" moves you to halfway the file. "90%" goes to near the end. The previous assumes that you want to move to a line in the file, no matter if it's currently visible or not. What if you want to move to one of the lines you can see? This figure shows the three commands you can use: +---------------------------+ H --> |text sample text| |sample text| |text sample text| |sample text| M --> |text sample text| |sample text| |text sample text| |sample text| L --> |text sample text| +---------------------------+ Hints: "H" stands for Home, "M" for Middle and "L" for Last.
*03.6* Telling where you are To see where you are in a file, there are three ways: 1. Use theCTRL-Gcommand. You get a message like this (assuming the 'ruler' option is off):"usr_03.txt" line 233 of 650 --35%-- col 45-52This shows the name of the file you are editing, the line number where the cursor is, the total number of lines, the percentage of the way through the file and the column of the cursor. Sometimes you will see a split column number. For example, "col 2-9". This indicates that the cursor is positioned on the second character, but because character one is a tab, occupying eight spaces worth of columns, the screen column is 9. 2. Set the 'number' option. This will display a line number in front of every line: > :set number < To switch this off again: > :set nonumber < Since 'number' is a boolean option, prepending "no" to its name has the effect of switching it off. A boolean option has only these two values, it is either on or off. Vim has many options. Besides the boolean ones there are options with a numerical value and string options. You will see examples of this where they are used. 3. Set the 'ruler' option. This will display the cursor position in the lower right corner of the Vim window: > :set ruler Using the 'ruler' option has the advantage that it doesn't take much room, thus there is more space for your text.
*03.7* Scrolling around TheCTRL-Ucommand scrolls down half a screen of text. Think of looking through a viewing window at the text and moving this window up by half the height of the window. Thus the window moves up over the text, which is backward in the file. Don't worry if you have a little trouble remembering which end is up. Most users have the same problem. TheCTRL-Dcommand moves the viewing window down half a screen in the file, thus scrolls the text up half a screen. +----------------+ |some text| |some text| |some text| +---------------+ |some text| |some text|CTRL-U--> || || |123456| |123456| +----------------+ |7890| || +----------------+ |example|CTRL-D--> |7890| +---------------+ || |example| |example| |example| |example| +----------------+ To scroll one line at a time useCTRL-E(scroll up) andCTRL-Y(scroll down). Think ofCTRL-Eto give you one line Extra. (If you use MS-Windows compatible key mappingsCTRL-Ywill redo a change instead of scroll.) To scroll forward by a whole screen (except for two lines) useCTRL-F. The other way is backward,CTRL-Bis the command to use. FortunatelyCTRL-Fis Forward andCTRL-Bis Backward, that's easy to remember. A common issue is that after moving down many lines with "j" your cursor is at the bottom of the screen. You would like to see the context of the line with the cursor. That's done with the "zz" command. +------------------+ +------------------+ |some text| |some text| |some text| |some text| |some text| |some text| |some text| zz --> |line with cursor| |some text| |some text| |some text| |some text| |line with cursor| |some text| +------------------+ +------------------+ The "zt" command puts the cursor line at the top, "zb" at the bottom. There are a few more scrolling commands, see |Q_sc|. To always keep a few lines of context around the cursor, use the 'scrolloff' option.
*03.8* Simple searches To search for a string, use the "/string" command. To find the word include, for example, use the command: > /include You will notice that when you type the "/" the cursor jumps to the last line of the Vim window, like with colon commands. That is where you type the word. You can press the backspace key (backarrow or<BS>) to make corrections. Use the<Left>and<Right>cursor keys when necessary. Pressing<Enter>executes the command.Note:The characters .*[]^%/\?~$ have special meaning. If you want to use them in a search you must put a \ in front of them. See below. To find the next occurrence of the same string use the "n" command. Use this to find the first #include after the cursor: > /#include And then type "n" several times. You will move to each #include in the text. You can also use a count if you know which match you want. Thus "3n" finds the third match. Using a count with "/" doesn't work. The "?" command works like "/" but searches backwards: > ?word The "N" command repeats the last search the opposite direction. Thus using "N" after a "/" command search backwards, using "N" after "?" searches forward. IGNORING CASE Normally you have to type exactly what you want to find. If you don't care about upper or lowercase in a word, set the 'ignorecase' option: > :set ignorecase If you now search for "word", it will also match "Word" and "WORD". To match case again: > :set noignorecase HISTORY Suppose you do three searches: > /one /two /three Now let's start searching by typing a simple "/" without pressing<Enter>. If you press<Up>(the cursor key), Vim puts "/three" on the command line. Pressing<Enter>at this point searches for three. If you do not press<Enter>, but press<Up>instead, Vim changes the prompt to "/two". Another press of<Up>moves you to "/one". You can also use the<Down>cursor key to move through the history of search commands in the other direction. If you know what a previously used pattern starts with, and you want to use it again, type that character before pressing<Up>. With the previous example, you can type "/o<Up>" and Vim will put "/one" on the command line. The commands starting with ":" also have a history. That allows you to recall a previous command and execute it again. These two histories are separate. SEARCHING FOR A WORD IN THE TEXT Suppose you see the word "TheLongFunctionName" in the text and you want to find the next occurrence of it. You could type "/TheLongFunctionName", but that's a lot of typing. And when you make a mistake Vim won't find it. There is an easier way: Position the cursor on the word and use the "*" command. Vim will grab the word under the cursor and use it as the search string. The "#" command does the same in the other direction. You can prepend a count: "3*" searches for the third occurrence of the word under the cursor. SEARCHING FOR WHOLE WORDS If you type "/the" it will also match "there". To only find words that end in "the" use: > /the\> The "\>" item is a special marker that only matches at the end of a word. Similarly "\<" only matches at the begin of a word. Thus to search for the word "the" only: > /\<the\>This does not match "there" or "soothe". Notice that the "*" and "#" commands use these start-of-word and end-of-word markers to only find whole words (you can use "g*" and "g#" to match partial words). HIGHLIGHTING MATCHES While editing a program you see a variable called "nr". You want to check where it's used. You could move the cursor to "nr" and use the "*" command and press "n" to go along all the matches. There is another way. Type this command: > :set hlsearch If you now search for "nr", Vim will highlight all matches. That is a very good way to see where the variable is used, without the need to type commands. To switch this off: > :set nohlsearch Then you need to switch it on again if you want to use it for the next search command. If you only want to remove the highlighting, use this command: > :nohlsearch This doesn't reset the option. Instead, it disables the highlighting. As soon as you execute a search command, the highlighting will be used again. Also for the "n" and "N" commands. TUNING SEARCHES There are a few options that change how searching works. These are the essential ones: > :set incsearch This makes Vim display the match for the string while you are still typing it. Use this to check if the right match will be found. Then press<Enter>to really jump to that location. Or type more to change the search string. > :set nowrapscan This stops the search at the end of the file. Or, when you are searching backwards, at the start of the file. The 'wrapscan' option is on by default, thus searching wraps around the end of the file. INTERMEZZO If you like one of the options mentioned before, and set it each time you use Vim, you can put the command in your Vim startup file. Edit the file, as mentioned at |not-compatible|. Or use this command to find out where it is: > :scriptnames Edit the file, for example with: > :edit ~/.vimrc Then add a line with the command to set the option, just like you typed it in Vim. Example: > Go:set hlsearch<Esc>"G" moves to the end of the file. "o" starts a new line, where you type the ":set" command. You end insert mode with<Esc>. Then write the file: > ZZ If you now start Vim again, the 'hlsearch' option will already be set.
*03.9* Simple search patterns The Vim editor uses regular expressions to specify what to search for. Regular expressions are an extremely powerful and compact way to specify a search pattern. Unfortunately, this power comes at a price, because regular expressions are a bit tricky to specify. In this section we mention only a few essential ones. More about search patterns and commands in chapter 27 |usr_27|. You can find the full explanation here: |pattern|. BEGINNING AND END OF A LINE The ^ character matches the beginning of a line. On an English-US keyboard you find it above the 6. The pattern "include" matches the word include anywhere on the line. But the pattern "^include" matches the word include only if it is at the beginning of a line. The $ character matches the end of a line. Therefore, "was$" matches the word was only if it is at the end of a line. Let's mark the places where "the" matches in this example line with "x"s:the solder holding one of the chips melted and thexxx xxx xxx Using "/the$" we find this match:the solder holding one of the chips melted and thexxx And with "/^the" we find this one:the solder holding one of the chips melted and thexxx You can try searching with "/^the$", it will only match a single line consisting of "the". White space does matter here, thus if a line contains a space after the word, like "the ", the pattern will not match. MATCHING ANY SINGLE CHARACTER The . (dot) character matches any existing character. For example, the pattern "c.m" matches a string whose first character is a c, whose second character is anything, and whose the third character is m. Example:We use a computer that became the cummin winter.xxx xxx xxx MATCHING SPECIAL CHARACTERS If you really want to match a dot, you must avoid its special meaning by putting a backslash before it. If you search for "ter.", you will find these matches:We use a computer that became the cummin winter.xxxx xxxx Searching for "ter\." only finds the second match.
*03.10* Using marks When you make a jump to a position with the "G" command, Vim remembers the position from before this jump. This position is called a mark. To go back where you came from, use this command: > `` This ` is a backtick or open single-quote character. If you use the same command a second time you will jump back again. That's because the ` command is a jump itself, and the position from before this jump is remembered. Generally, every time you do a command that can move the cursor further than within the same line, this is called a jump. This includes the search commands "/" and "n" (it doesn't matter how far away the match is). But not the character searches with "fx" and "tx" or the word movements "w" and "e". Also, "j" and "k" are not considered to be a jump. Even when you use a count to make them move the cursor quite a long way away. The `` command jumps back and forth, between two points. TheCTRL-Ocommand jumps to older positions (Hint: O for older).CTRL-Ithen jumps back to newer positions (Hint: I is just next to O on the keyboard). Consider this sequence of commands: > 33G /^TheCTRL-OYou first jump to line 33, then search for a line that starts with "The". Then withCTRL-Oyou jump back to line 33. AnotherCTRL-Otakes you back to where you started. If you now useCTRL-Iyou jump to line 33 again. And to the match for "The" with anotherCTRL-I. |example text ^| 33G |example text|CTRL-O|CTRL-I|example text| | V line 33 text ^ V |example text| | /^The |example text|CTRL-O|CTRL-IV There you are | V example textNote:CTRL-Iis the same as<Tab>. The ":jumps" command gives a list of positions you jumped to. The entry which you used last is marked with a ">". NAMED MARKS Vim enables you to place your own marks in the text. The command "ma" marks the place under the cursor as mark a. You can place 26 marks (a through z) in your text. You can't see them, it's just a position that Vim remembers. To go to a mark, use the command `{mark}, where "{mark}is the mark letter. Thus to move to the a mark: > `a The command 'mark (single quotation mark, or apostrophe) moves you to the beginning of the line containing the mark. This differs from the `mark command, which moves you to marked column. The marks can be very useful when working on two related parts in a file. Suppose you have some text near the start of the file you need to look at, while working on some text near the end of the file. Move to the text at the start and place the s (start) mark there: > ms The move to the text you want to work on and put the e (end) mark there: > me Now you can move around, and when you want to look at the start of the file, you use this to jump there: > 's Then you can use '' to jump back to where you were, or 'e to jump to the text you were working on at the end. There is nothing special about using s for start and e for end, they are just easy to remember. You can use this command to get a list of marks: > :marks You will notice a few special marks. These include: ' The cursor position before doing a jump " The cursor position when last editing the file [ Start of the last change ] End of the last change
Next chapter: |usr_04| Making small changes Copyright: see |manual-copyright| vim:tw=78:ts=8:ft=help:norl:
Generated by vim2html on Wed Aug 21 20:50:24 EDT 2002