*if_cscop.txt* For Vim version 6.1. Last change: 2001 Sep 05
VIM REFERENCE MANUAL by Andy Kahn
*cscope* *Cscope*
This document explains how to use Vim's cscope interface.
Cscope is a tool like ctags, but think of it as ctags on steroids since it
does a lot more than what ctags provides. In Vim, jumping to a result from
a cscope query is just like jumping to any tag; it is saved on the tag stack
so that with the right keyboard mappings, you can jump back and forth between
functions as you normally would with |tags|.
1. Cscope introduction |cscope-intro|
2. Cscope related commands |cscope-commands|
3. Cscope options |cscope-options|
4. How to use cscope in Vim |cscope-howtouse|
5. Limitations |cscope-limitations|
6. Suggested usage |cscope-suggestions|
7. Availability & Information |cscope-info|
This is currently for Unix only.
{Vi does not have any of these commands}
1. Cscope introduction *cscope-intro* The following text is taken from a version of the cscope man page:
Cscope is an interactive screen-oriented tool that helps you:
Learn how a C program works without endless flipping through a thick
listing.
Locate the section of code to change to fix a bug without having to
learn the entire program.
Examine the effect of a proposed change such as adding a value to an
enum variable.
Verify that a change has been made in all source files such as adding
an argument to an existing function.
Rename a global variable in all source files.
Change a constant to a preprocessor symbol in selected lines of files.
It is designed to answer questions like:
Where is this symbol used?
Where is it defined?
Where did this variable get its value?
What is this global symbol's definition?
Where is this function in the source files?
What functions call this function?
What functions are called by this function?
Where does the message "out of space" come from?
Where is this source file in the directory structure?
What files include this header file?
Cscope answers these questions from a symbol database that it builds the
first time it is used on the source files. On a subsequent call, cscope
rebuilds the database only if a source file has changed or the list of
source files is different. When the database is rebuilt the data for the
unchanged files is copied from the old database, which makes rebuilding
much faster than the initial build.
When cscope is normally invoked, you will get a full-screen selection
screen allowing you to make a query for one of the above questions.
However, once a match is found to your query and you have entered your
text editor to edit the source file containing match, you cannot simply
jump from tag to tag as you normally would with vi's Ctrl-] or :tag
command.
Vim's cscope interface is done by invoking cscope with its line-oriented
interface, and then parsing the output returned from a query. The end
result is that cscope query results become just like regular tags, so
you can jump to them just like you do with normal tags (Ctrl-] or :tag)
and then go back by popping off the tagstack with Ctrl-T. (Please note
however, that you don't actually jump to a cscope tag simply by doing
Ctrl-] or :tag without remapping these commands or setting an option.
See the remaining sections on how the cscope interface works and for
suggested use.)
2. Cscope related commands *cscope-commands*
*:cscope* *:cs* *:scs* *:scscope* *E259* *E262*
All cscope commands are accessed through suboptions to the main cscope
command ":cscope". The shortest abbreviation is ":cs". The ":scscope"
command does the same and also splits the window (short: "scs").
The available subcommands are:
add : Add a new cscope database/connection.
USAGE :cs add {file|dir} [pre-path] [flags]
[pre-path] is the pathname used with the -P command to cscope.
[flags] are any additional flags you want to pass to cscope.
EXAMPLES >
:cscope add /usr/local/cdb/cscope.out
:cscope add /projects/vim/cscope.out /usr/local/vim
:cscope add cscope.out /usr/local/vim -C
<
find : Query cscope. All cscope query options are available
except option #5 ("Change this grep pattern").
USAGE :cs find {querytype} {name}
{querytype} corresponds to the actual cscope line
interface numbers as well as default nvi commands:
0 or s: Find this C symbol
1 or g: Find this definition
2 or d: Find functions called by this function
3 or c: Find functions calling this function
4 or t: Find assignments to
6 or e: Find this egrep pattern
7 or f: Find this file
8 or i: Find files #including this file
EXAMPLES >
:cscope find c vim_free
:cscope find 3 vim_free
<
These two examples perform the same query. >
:cscope find 0 DEFAULT_TERM
<
Executing this example on the source code for Vim 5.1 produces the
following output:
Cscope tag: DEFAULT_TERM
# line filename / context / line
1 1009 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"amiga"
2 1013 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"win32"
3 1017 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"pcterm"
4 1021 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"ansi"
5 1025 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"vt52"
6 1029 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"os2ansi"
7 1033 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"ansi"
8 1037 vim-5.1-gtk/src/term.c <<GLOBAL>>
# undef DEFAULT_TERM
9 1038 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"beos-ansi"
10 1042 vim-5.1-gtk/src/term.c <<GLOBAL>>
#define DEFAULT_TERM (char_u *)"mac-ansi"
11 1335 vim-5.1-gtk/src/term.c <<set_termname>>
term = DEFAULT_TERM;
12 1459 vim-5.1-gtk/src/term.c <<set_termname>>
if (STRCMP(term, DEFAULT_TERM))
13 1826 vim-5.1-gtk/src/term.c <<termcapinit>>
term = DEFAULT_TERM;
14 1833 vim-5.1-gtk/src/term.c <<termcapinit>>
term = DEFAULT_TERM;
15 3635 vim-5.1-gtk/src/term.c <<update_tcap>>
p = find_builtin_term(DEFAULT_TERM);
Enter nr of choice (<CR> to abort):
The output shows several pieces of information:
1. The tag number (there are 15 in this example).
2. The line number where the tag occurs.
3. The filename where the tag occurs.
4. The context of the tag (e.g., global, or the function name).
5. The line from the file itself.
help : Show a brief synopsis.
USAGE :cs help
*E260* *E261*
kill : Kill a cscope connection (or kill all cscope connections).
USAGE :cs kill {num|partial_name}
To kill a cscope connection, the connection number or a partial
name must be specified. The partial name is simply any part of
the pathname of the cscope database. Kill a cscope connection
using the partial name with caution!
If the specified connection number is -1, then _ALL_ cscope
connections will be killed.
reset : Reinit all cscope connections.
USAGE :cs reset
show : Show cscope connections.
USAGE :cs show
*:cstag* *E257*
If you use cscope as well as ctags, |:cstag| allows you to search one or
the other before making a jump. For example, you can choose to first
search your cscope database(s) for a match, and if one is not found, then
your tags file(s) will be searched. The order in which this happens
is determined by the value of |csto|. See |cscope-options| for more
details.
|:cstag| performs the equivalent of ":cs find g" on the identifier when
searching through the cscope database(s).
|:cstag| performs the equivalent of |:tjump| on the identifier when searching
through your tags file(s).
3. Cscope options *cscope-options* Use the |:set| command to set all cscope options. Ideally, you would do this in one of your startup files (e.g., .vimrc). Some cscope related variables are only valid within |.vimrc|. Setting them after vim has started will have no effect! *cscopeprg* *csprg* 'cscopeprg' specifies the command to execute cscope. The default is "cscope". For example: > :set csprg=/usr/local/bin/cscope < *cscopetag* *cst* If 'cscopetag' set, the commands ":tag" and CTRL-] as well as "vim -t" will always use |:cstag| instead of the default :tag behavior. Effectively, by setting 'cst', you will always search your cscope databases as well as your tag files. The default is off. Examples: > :set cst :set nocst < *cscopetagorder* *csto* The value of 'csto' determines the order in which |:cstag| performs a search. If 'csto' is set to zero, cscope database(s) are searched first, followed by tag file(s) if cscope did not return any matches. If 'csto' is set to one, tag file(s) are searched before cscope database(s). The default is zero. Examples: > :set csto=0 :set csto=1 < *cscopeverbose* *csverb* If 'cscopeverbose' is not set (the default), messages will not be printed indicating success or failure when adding a cscope database. Ideally, you should reset this option in your |.vimrc| before adding any cscope databases, and after adding them, set it. From then on, when you add more databases within Vim, you will get a (hopefully) useful message should the database fail to be added. Examples: > :set csverb :set nocsverb < *cscopepathcomp* *cspc* The value of 'cspc' determines how many components of a file's path to display. With the default value of zero the entire path will be displayed. The value one will display only the filename with no path. Other values display that many components. For example: > :set cspc=3 will display the last 3 components of the file's path, including the file name itself.
4. How to use cscope in Vim *cscope-howtouse*
The first thing you need to do is to build a cscope database for your
source files. For the most basic case, simply do "cscope -b". Please
refer to the cscope man page for more details.
Assuming you have a cscope database, you need to "add" the database to Vim.
This establishes a cscope "connection" and makes it available for Vim to use.
You can do this in your .vimrc file, or you can do it manually after starting
vim. For example, to add the cscope database "cscope.out", you would do:
:cs add cscope.out
You can double-check the result of this by executing ":cs show". This will
produce output which looks like this:
# pid database name prepend path
0 28806 cscope.out <none>
Once a cscope connection is established, you can make queries to cscope and
the results will be printed to you. Queries are made using the command
":cs find". For example:
:cs find g ALIGN_SIZE
This can get a little cumbersome since one ends up doing a significant
amount of typing. Fortunately, there are ways around this by mapping
shortcut keys. See |cscope-suggestions| for suggested usage.
If the results return only one match, you will automatically be taken to it.
If there is more than one match, you will be given a selection screen to pick
the match you want to go to. After you have jumped to the new location,
simply hit Ctrl-T to get back to the previous one.
5. Limitations *cscope-limitations*
Cscope support for Vim is only available on systems that support these four
system calls: fork(), pipe(), execl(), waitpid(). This means it is mostly
limited to Unix systems.
Libraries are available for Win95 (win32) which translate a lot of Unix
system calls to the Win32 API. You can try the GNU-Win32 Project from Cygnus
(http://www.cygnus.com/misc/gnu-win32) or the DJGPP suite of tools
(http://www.delorie.com/djgpp/). I do not know the status of using these with
Vim, so they may or may not work.
Additionally, there are a couple of hard-coded limitations:
1. The maximum number of cscope connections allowed is 8. Do you
really need more?
2. Doing a |:tjump| when |:cstag| searches the tag files is not
configurable (e.g., you can't do a tselect instead).
6. Suggested usage *cscope-suggestions*
Put these entries in your .vimrc (adjust the pathname accordingly to your
setup): >
if has("cscope")
set csprg=/usr/local/bin/cscope
set csto=0
set cst
set nocsverb
" add any database in current directory
if filereadable("cscope.out")
cs add cscope.out
" else add database pointed to by environment
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
set csverb
endif
By setting 'cscopetag', we have effectively replaced all instances of the :tag
command with :cstag. This includes :tag, Ctrl-], and "vim -t". In doing
this, the regular tag command not only searches your ctags generated tag
files, but your cscope databases as well.
Some users may want to keep the regular tag behavior and have a different
shortcut to access :cstag. For example, one could map Ctrl-_ (underscore)
to :cstag with the following command: >
map <C-_> :cstag <C-R>=expand("<cword>")<CR><CR>
A couple of very commonly used cscope queries (using ":cs find") is to
find all functions calling a certain function and to find all occurrences
of a particular C symbol. To do this, you can use these mappings as an
example: >
map g<C-]> :cs find 3 <C-R>=expand("<cword>")<CR><CR>
map g<C-\> :cs find 0 <C-R>=expand("<cword>")<CR><CR>
These mappings for Ctrl-] (right bracket) and Ctrl-\ (backslash) allow you to
place your cursor over the function name or C symbol and quickly query cscope
for any matches.
7. Cscope availability and information *cscope-info*
If you do not already have cscope (it did not come with your compiler
license or OS distribution), then you can download it for free from:
http://cscope.sourceforge.net/
This is released by SCO under the BSD license.
If you want a newer version of cscope, you will probably have to buy it.
According to the nvi documentation:
You can buy version 13.3 source with an unrestricted license
for $400 from AT&T Software Solutions by calling +1-800-462-8146.
In Solaris 2.x, if you have the C compiler license, you will also have
cscope. Both are usually located under /opt/SUNWspro/bin
SGI developers can also get it. Currently a tardist file can be found at:
ftp://ftp.openage.com/pub/Sgi/Binaries/Cscope-13_3_tardist.gz
https://toolbox.sgi.com/toolbox/utilities/cscope/
The second one is for those who have a password for the SGI toolbox.
There is source to an older version of a cscope clone (called "cs") available
on the net. Due to various reasons, this is not supported with Vim.
The cscope interface/support for Vim was originally written by
Andy Kahn <ackahn@netapp.com>. The original structure (as well as a tiny
bit of code) was adapted from the cscope interface in nvi. Please report
any problems, suggestions, patches, et al., you have for the usage of
cscope within Vim to him.
vim:tw=78:ts=8:ft=help:norl:
Generated by vim2html on Wed Aug 21 20:50:24 EDT 2002